| XJM, XJX series of flotation machine belongs to self-suction stirring machine. It mainly used for separation of the coal below 0.5 mm, meanwhile the iron ore, phosphorus hydrochloric acid, lead, zinc ore effective equipments. Oblique deflection by double-impeller agitation, the pulp was a three-dimensional circle, pulp hill by the diversion center is expected to use aerosol Dosing methods and the use of negative pressure generated by the impeller rotation, self-priming agents into a mist of gas and air bubbles and contact with coal particles with a liquid automatic adjustment device with automatic control system to control the concentration of the volume of dry coal, and liquid delivery.
1.Mechanical stirring. Novel and unique way of feeding the pulp. Reasonable pulp flow large capacity.
2.Aeration efficiency is high, the adjustable range is wide, flotation speed. Boot condition, can adjust air inflow at will.
3.Mixing bodies with curved blades for the impeller and the steady flow radial board will enable the coal slurry circulation and moderate inflation.
4.For coal, grain size, concentration, and optimize the design parameters of fluid dynamics, high-density and thick, fine-grained coal has also been the effect of the ideal separation.
5.Compact, light weight, reliable operation. Flotation speed, fine-grained level of selective high-level coarse-grained effective flotation.
6.Drug consumption and low energy consumption, installed capacity and power consumption is less than the same type flotation machine with the specifications.
7.Structural parameters is reasonable, small footprint, taking into account of the compatibility with the old equipment.
8.Running high reliability, easy maintenance operations, pulp level single point of control, can automatically adjusted, but it can also be manual.
9.Impeller and the stator use wear-resistant materials, which service life is up 3 to 5 years.